 |
 |
 |
|
In response to the need for
smaller and lighter tactical sights, Aimpoint is proud to
introduce the new Micro T-1 electronic red-dot sight. Built to offer the
same battleproven
ruggedness as larger Aimpoint sights, the Micro T-1 is able to perform
under
extreme conditions while adding negligible weight to your weapon.
This new compact sight is suitable for use on rifles, carbines,
shotguns, submachineguns
and handguns. The Aimpoint Micro T-1 is ideal as a stand-alone sight,
and can also be piggybacked on top of larger magnifying scopes, night
vision, or
thermal imaging optics. The Micro T-1 weighs in at only 3.6 ounces, and
comes
complete with a patent-pending integral Picatinny mount that is keyed
into the sight
body to absorb recoil.
The Micro T-1 is a 1X (non magnifying) parallax-free optic that features
a 4 minute of
angle (MOA) red dot for fast target acquisition. No tools are required
to zero the sight,
as the top of the caps covering the windage and elevation screws fit
directly into
holes on the adjustment screws to make the adjustment. The Micro T-1 is
waterproof
to 25 meters (80 feet) and tough enough to stand up to the worst field
conditions.
Optimized for use with all generations of night vision devices, the
Micro T-1 features
a manual adjustment switch with 6 night vision compatible settings and 7
daylight
settings (including one extra bright setting for use in desert sunlight
or with laser
protection filters). Aimpoint s state-of-the-art ACET diode technology
allows the
Micro T-1 to operate continuously for over 5 years on a single CR-2032
battery.
The Micro T-1 is a very exciting tactical optic not just because of its
small size, but
also due to its extreme versatility said Aimpoint Vice President Brian
Lisankie. Not
only is the Micro T-1 a full-featured stand-alone combat optic, it can
also be mounted
on top of other magnifying optics, giving the operator dual capabilities
to engage
targets in a CQB situation as well as at longer ranges. Now, everyone
can have the
speed advantage of a red dot sight, no matter what type of weapon or
primary optic
they are carrying.
Unique features of the Aimpoint Micro T-1
• Ideal for rifles, carbines, shotguns, submachineguns and handguns
• Weight 3.7 oz. (105g) including mount
• 1X (non-magnifying) parallax free optic.
• Compatible will all generations of Night Vision Devices (NVD)
• 6 night vision compatible settings and 7 daylight settings – one
extra bright for use with laser protection glasses or in bright desert
sunlight.
• Integral Picatinny-style base allows easy attachment to any rail.
• Patent pending mount is keyed to the sight body to absorb recoil.
• New ACET technology allows 50,000 hours (over 5 years) of constant
operation from one battery
• 4 MOA dot
• Hard anodized non-reflective finish.
• Submersible to 80 feet (25 meters)
• Precision adjustments for windage and elevation. Top of protective
caps fits into holes on adjustment screws – no other tool required.
• Use as a stand alone sight or “piggybacked” on larger magnifying,
thermal, or night vision optics.
Standard features for all Aimpoint® sights
- Unlimited field of view
- Parallax-free and unlimited eye
relief
- Unaffected by extreme weather
conditions
- Rugged, durable construction
- No hazardous materials
- No laser emission that could be
harmful to your eyes
- Mechanical switch for speed and
reliability
- Increased aiming confidence
|
|
OPTICAL DATA |
| System |
Passive Red Dot Collimator
Reflex Sight |
|
Magnification |
1X |
| Eye relief
|
Unlimited |
| Reticle,
size |
4 MOA |
| Optical
coating |
Anti reflex and Band Pass
coatings, NVD compatible |
|
ELECTRONIC DATA |
| Battery Type |
One 3 V lithium battery,
type CR2032, commercially available |
| Battery
Life, typical |
Over 5 years of continuous
(day and night) use at pos 8 of 12 and |
| Switch, dot
brightness |
12 settings – 4 NVD and 8
Daylight of which 1Extra Bright, |
|
MECHANICAL DATA
|
| Material
housing |
Extruded, high strength
aluminum, hard anodized |
| Surface
finish |
Black to dark gray,
non-glare finish |
| Material
lens covers |
Rubber, black, non-glare
finish |
| Adjustment |
Range ±1 m at 100 meters (±1
yds at 100 yds) in windage and elevation, |
| Mounting |
Keyed surface Patent pending
mount keyed to the sight body to absorb recoil |
|
DIMENSIONS |
| Length |
62 mm (2.4) |
| Width/height |
41 mm x 36 mm (1.6” x 1.4”)
for sight only and 41 mm x 40 mm (1.6” x 1.6”) for sight with Mount |
| Ring width
|
none |
| Weight |
84 grams (3.0 oz) Sight
only, 105 grams (3.7 oz) Sight with Mount |
|
ENVIRONMENTAL DATA |
| Temperature
Range |
-45 oC to +71 oC (-50 oF to
+160 oF) |
| Water
resistance |
45 m (150 ft.) |
| Fits on
Picatinny rails |
|
|
|
|
|
|
|
|
|
